抽屜的操作方法

　　Operation method of drawer

　　1.在推入開關前，確保開關柜的開關手柄在“到位/遠”的正確位置，開關手柄的值在“off”位置，抽屜位置手柄在“low up (out)”位置，斷路器操作手柄位于“O”位置。

　　Before pushing in the switch, ensure that the switch handle of the switchgear is in the correct position of "in place/far", the value of the switch handle is in the "off" position, the drawer position handle is in the "low up (out)" position, and the circuit breaker operating handle is in the "O" position.

　　2.用雙手握住開關箱下面的兩個把手，慢慢地按下開關箱。

　　2. Hold the two handles under the switch box with both hands and slowly press down on the switch box.

　　3.當開關柜離滿推距離約4-5cm時，用雙手快速將開關柜推入。

　　When the switch cabinet is about 4-5cm away from full push, quickly push the switch cabinet in with both hands.

　　4.檢查開關柜是否被完全推入:檢查開關柜與箱體是否緊密配合，就可以知道開關柜是否被完全推入。

　　4. Check if the switchgear has been fully pushed in: Check if the switchgear is tightly fitted to the box to determine if the switchgear has been fully pushed in.

　　抽屜操作注意事項:

　　Drawer operation precautions:

　　1.推入開關柜必須雙手操作，防止單手操作造成開關柜左右偏轉，甚破壞第二個插件，造成損壞。

　　1. Pushing into the switchgear must be done with both hands to prevent one handed operation from causing the switchgear to deflect left and right, or even damaging the second plug, resulting in damage.

　　2.在上面的第三個步驟中，輕輕緩慢地推入開關柜，可能會導致插電失敗一兩次，導致插電過度加熱或開關無法啟動。

　　In the third step above, gently and slowly pushing in the switch cabinet may result in one or two failed plug ins, causing overheating or the switch to fail to start.

　　本文由 山東MNS低壓抽屜柜 友情奉獻.更多有關的知識請點擊  http://www.landmann.cn/   真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Shandong MNS low-voltage drawer cabinet For more related knowledge, please click http://www.landmann.cn/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Stay tuned